Bespoke Can-Am Ryker Body Kit with Front Storage
Availability: TBD
Bespoke Can-Am Ryker Body Kit with Front Storage
>> Optional appearance upgrade package will be revealed in an upcoming video! <<
Target Price: $1995.00 + shipping
Shipping is $300 via freight to the nearest Fedex Freight terminal or a commercial address in the 48 contiguous U.S. states. Residential delivery is available for an additional cost. See details below.
No sales tax on out of state orders. See details below.
Availability: TBD
Please read the following details and terms and conditions carefully before ordering.
We designed this custom Appearance, Performance, and Storage upgrade kit to fit the stock, non-tilting suspension of all Ryker models 2019 to present. This kit does not change the operating procedure of the Ryker. It is a DIY install kit that bolts on to the Ryker frame and does not require cutting, drilling, or welding anything to the Ryker frame.
Features and benefits:
*Exclusive, custom design takes the appearance of your Ryker to a whole new level. Stand out from the crowd and turn heads wherever you go!
*Improves high speed performance.
The light weight, sloped surface of our custom front end deflects air upward at high speed creating a high pressure area in the front, which translates into aerodynamic down-force. This in turn enhances front end grip for better handling and stability at highway speeds (reduces side to side swaying due to rough roads and 'wet traction improvement grooves' that are usually cut into concrete sections of highways).
*Concealed 12 gallon, lockable, and water proof storage compartment at the front end improves the utility of your Ryker.
This practical, spacious storage provides a sleek, sporty look compared with boxy saddle bags that hide the open rear wheel and take away from the sporty appearance of your ride. Additionally, placing luggage, however light, at the front shifts the combined center of gravity closer to the front between the spaced apart wheels. This in turn improves performance when navigating windy roads at high speed.
*Functional design updates:
We have made some changes to the original design to reduce the number of independent parts and hardware that make it easier and require less time and skill to install. We will post a video soon highlighting these changes.
*Optional appearance upgrade package:
*When we get closer to delivery dates, and before finalizing orders, we will release a video highlighting the updated functional design features along with an optional appearance upgrade package that gives our body kit a more aggressive look.
*Materials and manufacturing method:
*Every Ryker body kit is hand built in the USA by professional craftsmen who take pride in their work with the utmost attention to quality and detail.
*We use high quality marine grade composite resins and reinforcement fibers to create light weight and durable FRP composite kits designed to last a long time.
*Color, surface finish, and what to expect:
*The top layer of the Ryker body kit is a black tinted, UV stable, and impact resistant surfacing polyester resin/gelcoat that is common in boat, RV, and aftermarket automotive parts construction.
*The kits are shipped with the 'as molded' finish, which is a smooth, semi gloss to a gloss finish. You can buff, or wet sand and buff the surfaces for even a higher gloss look. *Alternately, for the best surface finish and appearance, you can paint or wrap the kit with any color theme that you desire for an even more personalized appearance.
*Shipping:
*Shipping is $300 flat rate to the 48 contiguous U.S. states via Fedex Freight to a commercial address, or can be picked up at the nearest Fedex Freight terminal to your location (you can visit the Fedex Freight website to find the nearest freight terminal to you. This is different from Fedex Ground locations).
*The package dimensions are 48 x 40 x 24 inches and weigh approximately 60 lbs. It is cost prohibitive to ship via UPS or Fedex Ground. You will need a pickup truck, cargo van, or trailer to pick up your package from the Fedex Freight terminal, and most likely a helper to unload and install.
*Residential tailgate freight delivery is available at an additional cost. You can request a residential delivery quote once you have pre ordered a kit.
*Shipping outside of the 48 contiguous states is currently not available unfortunately. No shipping charge for local pickup from our location.
*If you are interested in this kit and want it shipped outside of our coverage area, you must make your own shipping arrangements. We will work with you to accommodate pickup by your shipping carrier of your choice.
*Tax:
*We do not charge sales tax to orders shipped outside of Arizona. Local and state taxes will be added to all orders shipped within Arizona or for local up.
*Refunds and Returns:
*All sales are final. No returns or refunds. See details below.
*You will receive an email before we begin building your kit with a link to the installation instructions and a close up walkaround video of our kit to evaluate the quality of workmanship.
*If you decide this kit is not for you, you can request a refund of your deposit no questions asked. If you decide to move forward with your order, you can proceed to checkout.
Once full payment is received, we will build and ship your kit, usually within 2 weeks.
*Our kits are made custom to order and we do not accept returns or issue refunds. Please thoroughly review the details before ordering.
*If you prefer to inspect the Ryker kit in person before ordering, please reserve a kit first, then contact us with a request to schedule an in person visit at our location before you finalize your order.
*Warranty:
*We guarantee our kit to fit your Ryker and be free from manufacturing defects for one year from the date of receiving your kit.
*All warranty repairs are performed at our location in Chandler, AZ. Customer is responsible for all transportation and shipping costs to and from our location.
*Damage claims:
*We will inspect, thoroughly document the condition of your kit with photos, and wrap it with special vehicle transport protection film before packaging to prevent or reduce scratches during transportation.
*Any minor scratches that occur during transportation that can be buffed out will not be covered under warranty or claimed against freight insurance.
*When you receive your package take pictures and document any damage to the shipping box and report the damages to us so we can submit a claim and remedy the situation by assisting you in getting repairs, reimbursing you, or sending a new kit.
Tilting Can-Am Ryker Conversion kit
(Development on hold)
This is a bolt-on kit that converts all models of the Can-Am Ryker (600, 900, and Rally editions) to a tilting three wheeler.
The current prototype enables operating the Ryker like a free-leaning, two wheel motorcycle by counter-steering, but with a limited lean angle. This is possible by using our patented and patent pending tilting vehicle technologies.
To make the experience of leaning accessible to a broader segment of Ryker owners, we are developing a new prototype that will enable leaning by using an easy to use, intuitive power-tilt-control. This concept is not entirely new, but we are using patented and proprietary technologies, and our focus is on the commercial viability of this product. We believe we will bring a reasonably priced kit to the market that will give motorcycle enthusiasts a safer alternative to experience the thrill one can only get by leaning on a motorbike in the twisty roads.
Production of a DIY version of this kit will ultimately depend on the feedback and level of interest we receive.
Please stay tuned for updates.